Цифровая платформа по разработке и применению цифровых двойников CML-Bench®
Уникальный онлайн-курс «Цифровые двойники изделий»
CAD/CAE/CFD/CAO/HPC новости 24 Июля 2016 года

Clock Radio Manual Work: Audiosonic Caa-09169

Press the ALARM button again to toggle between "Buzz" (buzzer) or "Radio".

| Problem | Likely Cause | Working Solution | | :--- | :--- | :--- | | | Dimmer button pressed twice | Press the DISPLAY button on top right. Cycle through: Bright > Dim > Off. | | Alarm didn’t go off | The AM/PM is wrong on the alarm time | Re-set the alarm. Look for a tiny dot next to the time. No dot = AM. Dot = PM. | | Radio turns on by itself at 3 AM | Sleep timer was left on from last night | The sleep timer is a countdown. You must press SNOOZE once to cancel a dormant sleep cycle. | | Buzzer is too quiet | Volume knob is set incorrectly | The main volume knob only controls radio volume. The buzzer volume is a secondary trimmer – rotate the knob fully left, then slowly right until the buzzer clicks on. | | Cannot change the station | Lock feature engaged | Look for a tiny switch on the back labeled "TUNE LOCK." Slide to "OFF." | | Time resets every time I unplug it | Backup batteries are dead | Replace the 2 x AA batteries. Note: Batteries do NOT power the display. They only preserve memory for up to 2 days. | Audiosonic Caa-09169 Clock Radio Manual WORK

(Invoking related search suggestions now.) Press the ALARM button again to toggle between

Новости на сайте по теме публикации:
Теги новости:
NX PTC Moldex3D