Ericsson Mini Link Cli Commands Instant

The Ericsson MINI-LINK Command Line Interface (CLI) is an essential tool for telecommunications engineers, offering a powerful alternative to graphical user interfaces for configuring, managing, and troubleshooting microwave transmission nodes. Access and Modes To interact with a MINI-LINK node via CLI, users typically connect through an O&M LAN port using protocols like Telnet or SSH. The interface operates in distinct modes to prevent accidental changes: User Exec Mode: The initial mode for basic monitoring (indicated by a > prompt). Privileged Exec Mode: Entered using the enable command, this mode allows for configuration changes (indicated by a # prompt). Hidden/Debug Mode: In certain nodes like the MINI-LINK TN, the cliunlock command reveals advanced diagnostic commands used for deep troubleshooting. Essential Command Categories CLI commands for MINI-LINK are generally grouped by their functional impact on the network element (NE): System Navigation and Information: list : Displays all available CLI commands in the current mode. ? : Provides context-sensitive help or lists available sub-commands. terminal : Configures terminal settings for the current session. Configuration and Management: show startup-config : Displays the configuration that will be loaded upon the next reboot. copy : Used to move files, such as copying configurations or software loads to/from an FTP server. activate : Finalizes the deployment of a new software release or configuration module. Connectivity and Diagnostics: ping : Verifies basic network reachability to other sites or management servers. rsyslog enable : Activates system logging to track changes and errors. generate-report : Compiles node data into a diagnostic report for support teams. The Role of CLI in Modern Networks While graphical tools like the MINI-LINK Craft or ENM are common, the CLI remains indispensable for automation. Engineers often use the CLI Tool to prepare and deploy batch scripts, which significantly speeds up the commissioning of large-scale microwave networks. By mastering these commands, technicians ensure that high-capacity backhaul remains stable and responsive. Ericsson Mini Link Cli Commands Extra Quality

Master Guide: Essential Ericsson MINI-LINK CLI Commands for Network Professionals Introduction Ericsson’s MINI-LINK portfolio is the backbone of many mobile transport networks, providing reliable microwave backhaul for 4G, 5G, and critical infrastructure. While the MINI-LINK Craft (graphical interface) is widely used, the Command-Line Interface (CLI) remains the most powerful, scriptable, and efficient way to configure, troubleshoot, and monitor MINI-LINK nodes—especially in headless environments or automated networks. This article provides an exhaustive reference to Ericsson MINI-LINK CLI commands , covering connection methods, navigation modes (User Exec, Privileged Exec, Global Config), interface configuration, radio link setup, alarms, performance monitoring, and advanced troubleshooting.

1. Accessing the MINI-LINK CLI Before running commands, you need access:

Via Ethernet (Management port): Default IP is often 10.10.10.1/24 (check your node’s sticker). Via Serial (RS-232): 9600 baud, 8 data bits, 1 stop bit, no parity, no flow control. Via Telnet/SSH: SSH is strongly recommended. Ensure IP reachability. ericsson mini link cli commands

Initial Login: login: admin Password: default (often "admin" or "password" – change immediately)

After login, you land in User Exec mode ( > prompt).

2. CLI Mode Hierarchy Understanding modes is critical. MINI-LINK CLI follows a Cisco-like structure but with Ericsson specifics. | Mode | Prompt Example | Purpose | |------|----------------|---------| | User Exec | MINI-LINK> | Basic monitoring, pings, show commands (limited) | | Privileged Exec | MINI-LINK# | All show commands, debug, clear counters, reload | | Global Config | MINI-LINK(config)# | System-wide settings | | Interface Config | MINI-LINK(config-if-eth0)# | Port-specific settings | | Radio Config | MINI-LINK(config-mdradio)# | Radio parameters (frequency, power, ID) | Moving between modes: MINI-LINK> enable # Enter privileged mode Password: (enable password) MINI-LINK# configure terminal # Enter global config MINI-LINK(config)# MINI-LINK(config)# interface eth0 # Interface-specific MINI-LINK(config-if)# exit # Back to global MINI-LINK(config)# end # Back to privileged exec The Ericsson MINI-LINK Command Line Interface (CLI) is

3. Essential Show Commands (Monitoring & Troubleshooting) These are your daily-use commands. System Information MINI-LINK# show version # Firmware, hardware, serial number MINI-LINK# show system # Uptime, temperature, power supply status MINI-LINK# show running-config # Active configuration MINI-LINK# show startup-config # Saved configuration (non-volatile)

Interface Status MINI-LINK# show interfaces summary # All ports, speed, admin/oper status MINI-LINK# show interface eth0 # Detailed: MAC, duplex, errors, drops MINI-LINK# show interface eth0 statistics # Rx/Tx octets, unicast, multicast, CRC errors

Radio Link Performance (Critical for microwave links) MINI-LINK# show radio link # Link state, actual bitrate, modulation MINI-LINK# show radio performance # RSL, XPI, MUT, TX power MINI-LINK# show radio al0 # Adaptive modulation status MINI-LINK# show radio link-quality # BER, LOF, LOS, current and historic MINI-LINK# show radio hop-diagnostics # Detailed per-hop metrics (if multi-hop) Privileged Exec Mode: Entered using the enable command,

Alarm & Event Handling MINI-LINK# show alarms active # Current major/minor alarms MINI-LINK# show alarms history # Last 100 alarm events MINI-LINK# show events # Syslog-like event buffer MINI-LINK# clear alarms all # Acknowledge & clear (use with care)

Ethernet & QoS MINI-LINK# show vlan # Configured VLANs MINI-LINK# show qos queue # Queue occupancy, drops per class MINI-LINK# show ethernet oam # CFM, SLM, LM stats