Fagor Fi-80 Dishwasher Manual __exclusive__ Jun 2026

(integrated – hidden behind cabinet door)

| Flashing Pattern | Error | DIY Fix | |----------------|-------|---------| | | Water inlet failure (no water or low pressure) | Check that the water supply valve is fully open. Ensure the inlet hose isn't kinked. Clean the mesh filter inside the water inlet pipe. | | "Salt" and "Rinse Aid" LEDs flash together | Drainage issue (blocked pump or filter) | Clean the bottom filter and the drain hose. Check the kitchen sink’s air gap. Remove any food debris from the drain pump impeller. | | "Intensive" light flashes | Heating element error | The water is not reaching temperature. This often requires a technician to replace the heating element or thermistor. | | All program lights flash | Electronic control board fault or door latch failure | Try unplugging the machine for 10 minutes to reset the board. If it persists, check the door microswitch. | fagor fi-80 dishwasher manual

| Component | Description | |-----------|-------------| | Upper basket | Adjustable height | | Lower basket | For plates, pots, pans | | Cutlery basket | Removable, fits cutlery and utensils | | Detergent dispenser | With rinse aid compartment | | Rinse aid dispenser | Adjustable dosage | | Salt reservoir | For water softener (under lower basket) | | Filters | Main, coarse, fine | | Spray arms | Upper and lower | | Control panel | Buttons and indicators | (integrated – hidden behind cabinet door) | Flashing

Regular maintenance is essential to ensure the Fagor FI-80 dishwasher operates efficiently: | | "Salt" and "Rinse Aid" LEDs flash