Redsail Cutting Plotter Software Installation -

Your plotter likely uses a USB-to-serial connection. Windows requires a specific driver (often ) to recognize this port. Connect & Power On

so your computer can recognize the machine, and then configuring your design software

Use the "Auto-Detect" feature during the cutter setup phase to let the software find the Redsail machine automatically. 3. Critical Communication Settings redsail cutting plotter software installation

You send a circle, but the plotter draws zigzags. Solution: This is a baud rate mismatch.

settings and ensure the output port matches the COM port noted in Device Manager. Flow Control : Set the software's flow control to to match your hardware settings. FlexiSIGN-PRO Driver Setup : Install the Redsail driver from your disc and select REDSAIL TECH within the FlexiSIGN Production Manager. Port Settings Your plotter likely uses a USB-to-serial connection

Look at the rear panel of your Redsail cutter:

If the cuts are misaligned or the cutter stops halfway: settings and ensure the output port matches the

Download the driver from the manufacturer or a trusted source like Once installed, check your Device Manager