English

Purchase

Try Live2D

Sileadinc.com Kmdf Hid Minidriver For Touch I2c Device 【Best Pick】

The is a robust, modern Windows driver that enables Silead touch controllers to integrate seamlessly into the HID input stack. It relies on a clean KMDF architecture, standard I2C transport, and often requires firmware upload at runtime. Troubleshooting typically involves checking ACPI enumeration, I2C timing, and firmware integrity. For developers, understanding its HID minidriver interface and I2C protocol is key to customization or porting to other platforms.

: Touch works briefly after boot, then stops. Cause : CRC mismatch or I2C timing issue. Fix : Check I2C clock speed (usually 400kHz). Slow down via ACPI or driver parameter. sileadinc.com kmdf hid minidriver for touch i2c device

| Chip | Max Touches | Resolution | Notes | |------|-------------|------------|-------| | GSL1680 | 5 | 2048x1536 | Older, needs FW upload | | GSL3670 | 10 | Up to 4K | Common in 2020+ tablets | | GSL3680 | 10 | Up to 4K | Supports glove mode | | GSLx6xx | 5-10 | Varies | Generic family | The is a robust, modern Windows driver that

: Converts raw data from Silead touch sensors into standard Windows touch gestures (swipes, pinches, etc.). Fix : Check I2C clock speed (usually 400kHz)

You are not currently viewing
the download page on a computer.

This software is designed for use on computers only.

↓Copy the URL for the download page↓

  • WinWindows
  • MacmacOS : Apple M Series
  • MacmacOS : Intel

Version with confirmed stability.

For experimenting new features.
Bugs and requests can be reported here.

Update history

System requirements

Important notes

Release of MOC3 File Verification Tool

A vulnerability has been confirmed in Live2D Cubism Core, which may cause a crash of “Cubism Editor” and “Cubism Viewer (for OW)” when loading MOC3 files that are not in the correct format.
We have taken countermeasures for Cubism Editor 4.2.03_1 and Cubism Editor 4.2.04 beta3 or later, but past versions require continued attention.
Please download “MOC3 Consistency Checker,” a tool for verifying whether or not the MOC3 files are in the correct format.

For details, please refer to the Live2D Cubism Core Vulnerability Announcement.

The difference between “release version” and “beta version”.

The beta version allows you try out the latest features that will be available in future release versions. The release version is definitive and relatively stable.

The is a robust, modern Windows driver that enables Silead touch controllers to integrate seamlessly into the HID input stack. It relies on a clean KMDF architecture, standard I2C transport, and often requires firmware upload at runtime. Troubleshooting typically involves checking ACPI enumeration, I2C timing, and firmware integrity. For developers, understanding its HID minidriver interface and I2C protocol is key to customization or porting to other platforms.

: Touch works briefly after boot, then stops. Cause : CRC mismatch or I2C timing issue. Fix : Check I2C clock speed (usually 400kHz). Slow down via ACPI or driver parameter.

| Chip | Max Touches | Resolution | Notes | |------|-------------|------------|-------| | GSL1680 | 5 | 2048x1536 | Older, needs FW upload | | GSL3670 | 10 | Up to 4K | Common in 2020+ tablets | | GSL3680 | 10 | Up to 4K | Supports glove mode | | GSLx6xx | 5-10 | Varies | Generic family |

: Converts raw data from Silead touch sensors into standard Windows touch gestures (swipes, pinches, etc.).

Version with confirmed stability.

For experimenting new features.
Bugs and requests can be reported here.

Update history

System requirements

How to check the CPU (Intel / Apple silicon) installed in your Mac

Important notes

[For users of Cubism Editor 5.1.02 or later]

If you activated your license with Cubism Editor 5.1.02 or later, the license cannot be concurrently used in previous versions.
If you wish to use an earlier version, please deactivate the license, then reactivate it in the Cubism Editor version you wish to use.
For more details: https://help.live2d.com/en/other/other_09/

To customers who are considering updating their macOS

If you update your macOS to the latest version, be sure to first deactivate your Cubism Editor license before updating the OS.
Please click here for the steps to deactivate the license. When using Cubism Editor with the most recent macOS, be sure to also update Cubism Editor to the latest version.

The difference between “release version” and “beta version”.

The beta version allows you try out the latest features that will be available in future release versions. The release version is definitive and relatively stable.